Welcome ACMAN factory,come to understand our strength.

Language:

English

English

雷竞技app下载最新: Healthy Manufacture

Home/All/Cartridge Dust Collector/Series B-J | Pulse-jet Dust Collector with Dust Hopper/

ACMAN Downflow Dust Collector Cartridge Filter merv 15 Industrial Pleated Filter Jet Dust Extractors

Categories	Series B-J \| Pulse-jet Dust Collector with Dust Hopper
Brand	ACMAN
Model	TE-Type
FOB port	SHANGHAI/NINGBO
付款条件	T/T
Update Time	October 13,2023

Contact Now

Favorites

Detail Information

ACMAN Downflow Dust Collector Cartridge Filter merv 15 Industrial Pleated Filter Jet Dust Extractors

How does downflow cartridge dust collector working?

Filtration Mode

The raw gas come into the dust collector body, the cartridge pleated filters purifying the gas, and the dust be separated on the surface of the filters, some dust is fall down into the dust bin.

then the cleaned air come out of the dust collector.

Cleaning Mode

The filters surface covered dust and became a dust cake, that making the pressure high, the timer or differential gauge give the signal, and the pulse controller working, then the pulse-jet give the compressed air back-flow inside of the filters. The dust falls into the dust bin.

Advantages

1: Lower initial cost per cubic foot of air per minute;

2:Higher efficiency—cleaner air;

3:Lower pressure drop— greater energy savings;

4:Fewer filter changeouts;

5:Reduced filter disposal cost;

6:Easy system setup;

7:Less maintenance;

8:10-year warranty

Easy to use

Quick-release handles provide easy cover removal and faster filter access

Compact

Smaller footprints for applications that require maximum cleaning efficiency in even smaller spaces

Powerful

Dust collectors provide 25 percent more capacity than same-sized dust collectors

Cost Effective

The proprietaryFilter Cleaning System averages up to 30 percent increase in pulse cleaning energy for unmatched cleaning ability

Innoative

Uniquecartridge filters provide the longest filter life and highest filtration efficiency—which lowers cost

Technical data

Model	Air Volume（m³/h）	Filter Area(m2)	Size(mm)	Efficiency
TE-2-8	3600-7200	80	1000x2200x3320	99.9%
TE-2-16	7200-14400	160	2000x2200x3320	99.9%
TE-2-24	10800-21600	240	3000x2200x3320	99.9%
TE-3-12	5400-10800	120	1000x2200x3790	99.9%
TE-3-24	10800-21600	240	2000x2200x3790	99.9%
TE-3-36	16200-32400	360	3000x2200x3790	99.9%
TE-4-16	7200-14400	160	1000x2200x4250	99.9%
TE-4-32	14400-28800	320	2000年x2200x4250	99.9%
TE-4-48	21600-53200	480	3000x2200x4250	99.9%
TE-4-64	28800 - 57600	640	4000x2200x4250	99.9%
TE-4-80	36000-72000	800	5000x2200x4250	99.9%

Customer cases sharing

This is a DFO central dust collection system which installed on the roof of the factory, it including the downflow dust collector body, the centrifugal fan withsilence box, and silencer with an anti-rain chimney. On the pipe, we installed a one-way valve to prevent the backflow air influence the front-end when pulse-jet system working.

Installed on the rooftop should concern three facets:

1: The windproof structure: Not only the pipes but also the dust collector should concern the wind. On rooftop, the wind level is larger than usual.

2: Remote control: we have a remote control signal for users to control the pulse controller and centrifugal fan.

3: The dust bin could remove and clean for a regular time.

Our dust collector could set outdoor, but we recommend to have a shelter for him.

Used for fluidized-bed dryer

Fluidized-bed dryer like Glatt, have it first stage of filtration, but it is not enough because the first stage's filter bag efficiency is very low.

Our central downflow dust collector plays an important role in the exhaust gas emission control.

Now, we have customers including Enger Fluided bed, Jinggong dryers, syntogen granulators....

The airflow is from 2000-12000m2/h.

HVAC central dust collection

Ventilation in pharma factory or other cleanroom plants is so important that the should balance the primary air system.

So, this cartridge jet dust collector should setting on the exhaust system.

The airflow is relevant to the cleanroom air exchange time per hour.

For example, the clean room is 30m3, it need 30 times per hour, so the airflow: 30*30*1.2=1080m3/h.

The pulse-jet system could keep the cartridge filter renewable and cleaning in a regular time.

Video